| Paint Test Equipment (((All Of this products made by Paint 'u.k')))
|
|
|
|
|
|
|
Surface Roughness - Surface Profile Gauge - R1006
|
|
|
| Range Metric |
0–1000μm / 0–40mils |
| Resolution |
1μm / 0.1mils |
| Accuracy |
±2% |
The Surface Profile Gauge allows the peak-to-valley height of blast-cleaned
surfaces to be accurately measured in accordance with the ASTM D4417 Standard.
A simple-to-use Surface Profile Gauge, offering a high resolution of 1µm (0.1mils).
The blasted profile is measured very quickly and with a high degree of accuracy by operating the instrument as follows: Place the Profile Gauge on the glass plate and zero the instrument. Now place the gauge on the blasted profile. The foot sits on top of the peaks and the sharp stylus travels to the bottom of the valleys allowing the gauge to display the peak-to-valley height.
In addition to blasted profile evaluation, this gauge can also be used for pitting and cavity depths caused by corrosion.
Readings are switchable between metric and imperial.
Complies with International Standards: ASTM D 4417-B and SABS 772.
Calibration Certificate with traceability to UKAS is an optional extra. The Certificate is supplied in a paper format and is available online through the Calibration Portal (under Browse Categories) on this website. The Calibration Portal will list all your equipment that is calibrated by Paint Test Equipment, showing the renewal dates and allowing Calibration Certificates to be viewed at any time.
Supplied in a Foam-Filled Carrying Case with Glass Zero Disk. |
|
|
|
|
|
| |