Welding Inspection
|
|
1 - Digital Welding Gauge
|
 |
|
Specification:
Holds either zero setting or measured value at any position for diferential measurments.
Serial output for interfacing with computor or printer.
Automatically turns on by moving scale or via On/Off key.
Automatic shut off after 4 minutes.
LCD Display
IN/MM switchable.
Slider Clamp Screw.
Output Connector
Hold Switch
ON/OFF Switch
Measures Butt Weld reinforcement.
Measures Throat.
|
| ------------------------------------------------------------------------------------------------------------------- |
|
2 - Bridge Cam Gauge (GAL)
|
.jpg) |
|
Specification:
Bridge Cam Gage
The following measurements are possible in either inches or millimeters: Angle of Preparation, Excess Weld Metal, Depth of Undercut, Depth of Pitting, Weld Throat Size, and more |
| ------------------------------------------------------------------------------------------------------------------- |
|
3 - Hi-Lo Weld Gauges (Gal)
|
.jpg) |
Specification:
Measure crown height of welds, fillet weld size, internal misalignment, bevel on end preperation, fit-up gap, pipe wall thickness, scribe line and socket welds. |
| ------------------------------------------------------------------------------------------------------------------- |
|
4 - Pearson Mastergage
|
 |
|
Specification:
Measures fillet leg length and weld throat size, undercut and pitting depth, excess weld metal, root and face gap, angle of preparation and misalignment.
Similar to the original Cambridge Gauge or TWI Gauge this version offers exactly the same measuring capabilities at very competitive price
|
| ------------------------------------------------------------------------------------------------------------------- |
|
5 - Adjustable Fillet Weld Gauge (Gal)
|
.jpg) |
|
Specification:
Measures fillet welds, unequal weld leg lengths and weld throat thicknesses. to measure fillet welds place irregular curve edge flush to the horizontal toe of the weld so the straight edge is in line with the horizontal member. To measure weld throat thickness place the 45deg angle end flush to the horizontal and vertical members. loosen the thumb screw and slide the pointer until it touches the face of the weld. |
| ------------------------------------------------------------------------------------------------------------------- |
|
6 - AWS Gauge
|
 |
|
Specification:
Pocket size stainless steel device for accurate checking of convex or concave fillet and butt weld reinforcements, in accordance with AWS DI.I para 3.6 specifications. Supplied in imperial or metric units
|
| ------------------------------------------------------------------------------------------------------------------- |
|
7 - V-WAC
|
 |
|
Specification:
Stainless Steel, Checks undercut, Crown Hieght, Checks Pits.
|
| ------------------------------------------------------------------------------------------------------------------- |
|
8 - Fillet Welding Gauge
|
 |
|
Specification:
Stainless Steel
Measures Fillet Leg Size & Fillet Throat Size
|
| ------------------------------------------------------------------------------------------------------------------- |
|
9 - Single Purpose Hi-Lo Gauge
|
 |
|
Specification:
Checks the internal alignment and rootweld spacing to eliminate rejects and improve productivity. |
| ------------------------------------------------------------------------------------------------------------------- |
|
10 - W.T.P.S Undercut Gauge
|
 |
|
Specification:
Measures undercuts 0.010" (0.25 mm) deep when the weld is transverse to the primary stress in the part that is undercut. Includes calibration block which has been precisionbeen surface ground with 0.0005 tolerence for exceptional accuracy.
|
| ------------------------------------------------------------------------------------------------------------------- |
|
11 - Skew-T Fillet Gauge
|
 |
|
Specification:
Check Angle of Vertical Member, Weld Acute Side, Weld Obtuse Side |
| ------------------------------------------------------------------------------------------------------------------- |
|
12 - Calculator for Skew-T Fillet Gauge
|
 |
| |